| |
 |
TEXTILE |
|
We are representing many overseas
companies for import and export of various commodities From
China , Korea, Iran, Taiwan Etc.
|
1) Nylon 6 Yarn / Nylon 66
Yarn - Industrial & Tire Grade [ 
Check Specifications ]
Nylon 6 & 66 Yarn used for producing nylon tire
cord fabric.
Nylon Yarn is also a basic raw material for producing
ropes, seatbelts, nets, etc. etc.
2) Nylon Tire Cord Fabric
[
Check Specifications ]
Nylon Tire Cord Fabrics are the optimum reinforcing
materials for bias ply tires such as truck, bus and
off-the-road tires.
|
NYLON-YARN |
3) EP & NN
Ducks for Conveyor Belts [
Check Specifications ]
The means to make modern
transport system safe, scientific and more economical
has been an area of considerable study, and the modern
conveyor system has been adopted as a result for convey
quantities of things safely and easily with high efficiency
over a sharply sloped distance.
The conveyor belt used
in such applications should be highly durable, while
still required to be light weight and thin. In the
past, cotton and rayon yarns were used as reinforcing
fibers for conveyor belts, but the conveyor design
was restricted by the low strength of these belting
ducks. The manufacture of high strength conveyor belt
was made possible through the use of high-tenacity
nylon and polyester yarn.
NN Belting ducks sufficiently
satisfy all characteristics required for the conveyor
belt, improving the problem of high elongation of
nylon by heat treatment.
EP belting ducks have
been developed for use in conveyor belts for customers
who require high modulus or thermal resistance in
particular. |
CONVEYOR BELT |
4) Polyester Filament
Yarn [
Check Specifications ]
Polyester Filament Yarn is used
in manufacturing of polyester tire cord fabric and seat
belts, hoses, Polyester Cable Cord etc. |
POLYESTER FILAMENT YARN |
5) Polyester Tire Cord Fabric
[ Check
Specifications ]
Since the debut of pneumatic tires, the reinforcing fibers
used have continued to change in response to the required
performance characteristics of tires.
With the shift of social concerns in recent
years that emphasize the safety of tires, reduced fuel consumption,
low pollution, and high performance, the prominent structure
of tires has changed from the conventional bias tire structure
to the radial tire.
Recently developed high modulus low shrinkage
(HMLS) polyester tire cords, which have remarkably low hysteresis
loss, superior fatigue resistance, and higher chemical and
thermal stability, improve the uniformity and sidewall appearance
of radial tires.
HMLS tire cord has gained the reputation
as a preferred reinforcing material for the carcass of high
performance tires.
6) Polyester
Cable Cord [
Check Specifications ]
V-Belt reinforcing
fibers should be high in strength with low elongation
maintained against the load, and have high fatigue
resistance capable of withstanding repeated extensions.
With changes trending
to small-size, high-speed operation, reinforcing fibers
with high durability for the conditions of flexing
and compression are required.
The polyester reinforcing
fibers maintained high strength and are capable of
meeting all the conditions required of the V- Belt,
such as high modulus and high thermal resistance.
|
POLYESTER CABLE CORD |
Apart from the above, we are also
handling the following products :-
A) Conveyor Belts
B) Caprolactum
C) Jute Bags
D) Hot Stamping Foils
E) Non-Woven Fabric PP Spunbonded / Spunlace / Hydrophylic
Heat Sealable - Sanitary Napkin / Incontinent pads/ Baby
Diapers,
Adult Diapers, Disposable Gowns
/ Coveralls
F) 100% Human Hair Product Human Hair products are used
in manufacturing wigs, highly suaitable for human hair extension,
hair
pieces, men toupees and also human
hair is the basic raw material for producing amino acid.
G) Agricultural commodities – Wheat, Rice, Onions,
garlic, grains, pulses
Specifications of Nylon 6 Yarn
Technical data of spin draw yarn
|
|
|
ITEM |
Unit |
930dtex (840D) |
1400dtex (1260D) |
1870dtex (1680D) |
|
Breaking Strength |
N |
Min 72 |
Min 108 |
Min 143 |
|
Elongation at Break |
% |
12+/- 1.5 |
12+/-1.5 |
12+/-1.5 |
|
Tire Deviation |
Dtex |
+/-20 |
+/-30 |
+/-40 |
|
Variation coefficient of tire |
% |
Max 3.5 |
Max 3.5 |
Max 3.5 |
|
Variation coefficient of breaking strength |
% |
Max 4.0 |
Max 4.0 |
Max 4.0 |
|
Variation coefficient of elongation at
break |
% |
Max 4.5 |
Max 4.5 |
Max 4.5 |
|
Hot air shrinkage
150 degree 30 Min. |
% |
Max 10.0 |
Max 10.0 |
Max 10.0 |
SPECIFIC
NOTES :
The above are general specifications and can be changed
partly or totally, to make customers' requirements. |
 |
Technical data of traditional yarn
|
ITEM |
Unit |
930dtex (840D) |
1400dtex (1260D) |
1870dtex (1680) |
|
Breaking Strength |
N |
Min 72 |
Min 108 |
Min 143 |
|
Elongation at Break |
% |
9 +/- 1.5 |
9+/-1.5 |
9+/-1.5 |
|
Tire Deviation |
Dtex |
+/-20 |
+/-30 |
+/-40 |
|
Variation coefficient of tire |
% |
Max 3.5 |
Max 3.5 |
Max 3.5 |
|
Variation coefficient of breaking strength |
% |
Max 4.0 |
Max 4.0 |
Max 4.0 |
|
Variation coefficient of elongation at
break |
% |
Max 4.5 |
Max 4.5 |
Max 4.5 |
|
Hot air shrinkage
150 degree 30 Min. |
% |
Max 10.0 |
Max 10.0 |
Max 10.0 |
SPECIFIC
NOTES :
The above are general specifications and can be changed
partly or totally, to make customers' requirements. |
|
Nylon 6 Dipped Tire Cord Fabric Type
: 840D/1
Nylon Tire Cord
Fabric
Nylon Tire Cord Fabrics are the optimum reinforcing materials
for bias ply tires such as truck, bus and off-the-road tires.
|
ITEM |
Unit |
|
Breaking at load / per cord (N/end) |
> 70 |
|
Extension at Break |
21.0 +/- 2.0 |
|
Unevenness of Strength (%) |
< 4.0 |
|
Elongation under specified load
(%) |
7.5 +/- 1.0 @ 22.6N |
|
Unevenness of elongation at break (%) |
<6.0 |
|
Cord Gauge (mm) |
0.32 +/- 0.03 |
|
Z twist (Twist / 10cm) |
21.0 +/- 1.0 |
|
S twist (Twist / 10cm) |
|
|
Adhesion Strength (N/cm) |
> 60 |
|
Dip Pick up (%) |
5.0 +/- 1.0 |
|
Drying Shrinkage (150 degree Celsius
x 30 min) |
< 4.0 |
|
Moisture content (%) |
< 0.8 |
SPECIFIC
NOTES :
The above are general specifications and can be changed
partly or totally, to make customers' requirements. |
Type : 840D/2
|
ITEM |
Unit |
|
Breaking at load / per cord (N/end) |
> 136 |
|
Extension at Break |
21.0 +/- 2.0 |
|
Elongation under specified load (%) |
8.0 +/- 1.0 @ 44.1N |
|
Cord Gauge (mm) |
0.55 +/- 0.03 |
|
Adhesion Strength (N/cm) |
> 120 |
|
Dip Pick up (%) |
5.0 +/- 1.5 |
|
Drying Shrinkage (150 degree Celsius
x 30 min) |
< 8.0 |
SPECIFIC
NOTES :
The above are general specifications and can be changed
partly or totally, to make customers' requirements. |
|
Type : 1260 D/1
|
ITEM |
Unit |
|
Breaking at load / per cord (N/end) |
> 110 |
|
Extension at Break |
19.0 +/- 2.0 |
|
Elongation under specified load (%) |
7.0 +/- 1.0 @ 33.3 N |
|
Cord Gauge (mm) |
0.43 +/- 0.03 |
|
Adhesion Strength (N/cm) |
> 75 |
|
Dip Pick up (%) |
4.2 +/- 1.2 |
|
Drying Shrinkage (150 degree Celsius
x 30 min) |
< 4.0 |
SPECIFIC
NOTES :
The above are general specifications and can be changed
partly or totally, to make customers' requirements. |
Type : 1260 D/2
|
ITEM |
Unit |
|
Breaking at load / per cord (N/end) |
> 210 |
|
Extension at Break |
21.0 +/- 2.0 |
|
Elongation under specified load (%) |
8.0 +/- 1.0 @ 66.6 N |
|
Cord Gauge (mm) |
0.65 +/- 0.04 |
|
Adhesion Strength (N/cm) |
> 150 |
|
Dip Pick up (%) |
5.0 +/- 1.5 |
|
Drying Shrinkage (150 degree Celsius
x 30 min) |
< 8.0 |
|
Moisture (%) |
< 1.0 |
SPECIFIC
NOTES :
The above are general specifications and can be changed
partly or totally, to make customers' requirements. |
Type : 1260 D/3
|
ITEM |
Unit |
|
Breaking at load / per cord (N/end) |
> 310 |
|
Extension at Break |
22.0 +/- 2.0 |
|
Elongation under specified load (%) |
8.5 +/- 1.0 @ 100 N |
|
Cord Gauge (mm) |
0.78 +/- 0.04 |
|
Adhesion Strength (N/cm) |
> 180 |
|
Dip Pick up (%) |
5.0 +/- 1.2 |
|
Drying Shrinkage (150 degree Celsius
x 30 min) |
< 8.0 |
SPECIFIC
NOTES :
The above are general specifications and can be changed
partly or totally, to make customers' requirements. |
Type : 1680D/1
|
ITEM |
Unit |
|
Breaking at load / per cord (N/end) |
> 135 |
|
Extension at Break |
19.0 +/- 2.0 |
|
Elongation under specified load (%) |
8.0 +/- 1.0 @ 44.1 N |
|
Cord Gauge (mm) |
0.52 +/- 0.03 |
|
Adhesion Strength (N/cm) |
> 100 |
|
Dip Pick up (%) |
4.2 +/- 1.2 |
|
Drying Shrinkage (150 degree Celsius
x 30 min) |
< 4.0 |
SPECIFIC
NOTES :
The above are general specifications and can be changed
partly or totally, to make customers' requirements. |
Type : 1680D/2
|
ITEM |
Unit |
|
Breaking at load / per cord (N/end) |
> 275 |
|
Extension at Break |
22.0 +/- 2.0 |
|
Elongation under specified load (%) |
8.0 +/- 1.0 @ 88.2 N |
|
Cord Gauge (mm) |
0.75 +/- 0.04 |
|
Adhesion Strength (N/cm) |
> 170 |
|
Dip Pick up (%) |
5.0 +/- 1.5 |
|
Drying Shrinkage (150 degree Celsius
x 30 min) |
< 8.0 |
SPECIFIC
NOTES :
The above are general specifications and can be changed
partly or totally, to make customers' requirements. |
Type : 1890 D/2
|
ITEM |
Unit |
|
Breaking at load / per cord (N/end) |
> 310 |
|
Extension at Break |
22.0 +/- 2.0 |
|
Elongation under specified load (%) |
8.5 +/- 1.0 @ 100 N |
|
Cord Gauge (mm) |
0.78 +/- 0.04 |
|
Adhesion Strength (N/cm) |
> 180 |
|
Dip Pick up (%) |
5.0 +/- 1.2 |
|
Drying Shrinkage (150 degree Celsius
x 30 min) |
< 8.0 |
SPECIFIC
NOTES :
The above are general specifications and can be changed
partly or totally, to make customers' requirements. |
Polyester Filament
Yarn
1000D/192 Filaments with Min. GPD
8.6 to 8.8
1500D/192 Filament
| ITEM |
Polyester Filament Yarn
1000D / 192 FIL |
|
Strength (Kg.) |
7.8 +/- 0.3 |
|
Elongation (%) |
7+/-0.5 (@4.5Kg.) |
|
Elongation @ Break (%) |
10.0 +/- 2.0 |
|
Shrinkage (%) |
7 < (177 degree Celsius x 2) |
|
Denier (d) |
1000 +/- 10 |
|
Heat Resistance (%) |
93.0 +/- 3.0 |
|
GPD |
8.6 – 8.8 |
SPECIFIC
NOTES :
The above are general specifications and can be changed
partly or totally, to make customers' requirements. |
The Physical Properties of Polyester Dipped Tire Cord Fabric
| Item |
1000D/2P (Reg.) |
1000d/2P(HMLS) |
1500d/2P(Reg.) |
1500d/2P (HMLS) |
1000d/3P (HMLS) |
Remarks |
| Strength (Kg.) |
15.0 +/- 0.5 |
14.0+/-0.5 |
22.5+/- 0.5 |
22.0+/-0.5 |
22.0+/-0.5 |
|
| Elongation (%) |
4.5 +/-0.5 (@4.5Kg.) |
4.5 +/-0.5 (@4.5Kg.) |
5.0+/-0.5 (@6.8Kg.) |
4.5+/-1.0 (@6.8Kg.) |
4.0+/-0.5(@6.8Kg.) |
|
| Denier (d) |
2310+/-30 |
2400+/-30 |
3540+/-30 |
3500+/-30 |
3600+/-30 |
|
| Shrinkage (%) |
4.7+/-0.5
150deg.C x 30' |
3.0+/-0.5
177deg.C x 2'x20g |
7.0+/- 0.5
150deg. C x 30' |
3.0+/-0.5
150dg. C X 30 |
3.0+/- 0.5
177deg.C X 2'x30g |
|
| D.P.U (%) |
5.0+/- 1.0 |
5.5 +/- 1.0 |
5.0+/- 1.0 |
5.0+/- 1.0 |
6.0+/-1.0 |
|
| Adhesion (Kg.) |
12.0 +/- 1.0 (T-Test) |
12.0 +/- 1.0 (U-Test) |
16.0 +/- 2.0 (U-Test) |
16.0 +/- 2.0 (H-Test) |
12.0 +/- 1.0 (U-Test) |
|
| Twist (T/10cm) |
45.0+/- 1.0 |
47.0+/- 1.0 |
37.0+/- 1.0 |
36.0+/- 1.0 |
33.0+/- 1.0 |
(S) |
| |
49.0+/- 1.0 |
47.0+/- 1.0 |
37.0+/- 1.0 |
36.0+/- 1.0 |
33.0+/- 1.0 |
(Z) |
SPECIFIC NOTES
:
The above are general specifications and can be changed
partly or totally, to make customers' requirements. |
| Specification of PCC –
Soft Cord |
|
| ITEM |
2x3 |
3x3 |
4x3 |
5x3 |
6x3 |
9x3 |
12x3 |
| Breaking Strength |
>440 |
>640 |
> 850 |
> 1070 |
> 1280 |
> 1900 |
> 2500 |
| Elongation at Break (%) |
10.5+/-1.0 |
10.5+/-1.0 |
11.0+/-1.5 |
11.0+/-1.5 |
11.0+/-1.5 |
12.0 +/-2.0 |
13.0+/-2.0 |
| Elongation at 200N (%) |
4.0+/-0.5 |
2.6+/-0.5 |
|
|
|
|
|
| Elongation at 300N(%) |
|
|
2.8+/-0.5 |
2.1+/-0.5 |
|
|
|
| Elongation at 500N (%) |
|
|
|
|
3.3+/-0.5 |
|
|
| Elongation at 800N(%) |
|
|
|
|
|
3.6+/-0.5 |
3.0+/-0.5 |
| Quality at Length (g/100m) |
74+/-3.0 |
110+/-4.0 |
145+/-5.0 |
178+/-5.0 |
216+/-10.0 |
327+/-15.0 |
433+/-16.0 |
| Diameter (mm) |
1.00+/-0.10 |
1.15+/-0.10 |
1.35+/-0.10 |
1.50+/-0.10 |
1.65+/-0.10 |
2.10+/-0.10 |
2.40+/-0.10 |
| Dry Heat Shrinkage 50 degree Celsius x 3
min (%) |
3.5+/-0.5 |
3.3+/-0.5 |
3.2+/-0.5 |
3.2+/-0.5 |
3.2+/-0.5 |
2.9+/-0.5 |
2.3+/-0.5 |
| Adhesion Strength (N/cm) |
>190 |
>210 |
> 250 |
> 260
|
> 280 |
> 350 |
> 360 |
SPECIFIC
NOTES :
The above are general specifications and can be changed
partly or totally, to make customers' requirements. |
Specification of PCC Stiff Cord
Stiff Polyester Cord Standard
| Physical
Standard |
Unit |
1000D/2*3 |
1000D/3*3 |
1000D/2*5 |
1000D/6*3 |
1000D/9*3 |
Remark
|
| Breaking Strength |
N > |
411.6 |
588 |
686 |
1225 |
1850 |
Important Test
Standard |
| Elongation at load |
% |
(196N) 3.0+/-0.5 |
(196N) 2.8+/-0.3 |
(196N) 2.3+/-0.3 |
(196N) 2.5+/-0.5 |
(196N) 2.3+/-0.5 |
Important Test
Standard |
| Quality at length |
G/100M |
74+/-5 |
110+/-5 |
122+/-5 |
220+/-5 |
320+/-5 |
Common Test Standard |
| Hot Air Shrinkage |
% < |
5.0 (Free Shrinkage) |
Important Test
Standard |
| Agglutinate Strength |
N/CM |
250 |
300 |
320 |
380 |
400 |
Important Test
Standard |
| Diameter |
MM |
1.00 +/- 0.05 |
+/-0.05 |
+/-0.05 |
+/-0.05 |
2.0+/- 0.1 |
Common Test Standard |
| Single Twist |
T/M/S |
190+/- 10 |
150+/-10 |
200+/-10 |
150+/-10 |
110+/-5 |
Important Standard |
| Ply Twist |
T/M/Z |
120+/-10 |
110+/- 10 |
90 +/- 10 |
90+/-10 |
65+/-5 |
Important Standard |
| Appearance quality
standard / Important Control Team |
1. Molding
level; No meshy Line; No Bugle type |
|
2. Dip pick-up is symmetrical; Color
is accordant ; No mucus spot; bladder and colour delamination
|
|
3. Twist is symmetrical and accordant;
No missing section; back against section |
|
4. No broken wheel hidden trouble;
Plastic wheel has no oil spot, dust moisture |
|
5. The hard strength is accordance
with the national standard. However mastering cable cord
can not be too hard. Sticking to handle twist with
no pervasion |
SPECIFIC
NOTES :
The above are general specifications and can be changed
partly or totally, to make customers' requirements. |
EP & NN Ducks for
Conveyor Belts
NN Belting fabric – Specification |
BELTING-FABRIC |
| ITEM |
Unit |
NN
– 80 |
NN
– 100 |
NN
– 125 |
NN-
150 |
NN-200 |
NN-250 |
NN-300 |
NN-400 |
NN-500 |
| |
Warp |
Weft |
Warp |
Weft |
Warp |
Weft |
Warp |
Weft |
Warp |
Weft |
Warp |
Weft |
Warp |
Weft |
Warp |
Weft |
Warp |
Weft |
| Structure |
Dtex |
930
x 1 |
930
x1 |
930
x 1 |
930
x 1 |
1400
x 1 |
1400
x 1 |
1870
x 1 |
1400
x 1 |
1870
x 1 |
1870
x 1 |
1400
x 2 |
1400
x 2 |
1870
x 2 |
1870
x 2 |
1870
x 3 |
1870
x 2 |
1870x
4 |
1870
x 2 |
| Density |
End
/ 10cm |
175+/-2 |
70
+/-2 |
196+/-2 |
78
+/-2 |
150
+/-2 |
58+/-2 |
138+/-2 |
68+/-2 |
178+/-2 |
56+/-2 |
144+/-2 |
44+/-2 |
136+/-2 |
36+/-2 |
120+/-2 |
36+/-2 |
120+/-2 |
38+/-2 |
| Tensile
Average > |
N/mm
|
105 |
40 |
125 |
50 |
150 |
55 |
175 |
65 |
226 |
75 |
280 |
78 |
345 |
85 |
445 |
85 |
555 |
100 |
| Tensile
Strength
|
95 |
35 |
110 |
40 |
130 |
45 |
155 |
55 |
208 |
65 |
255 |
68 |
320 |
72 |
412 |
75 |
505 |
86 |
| 10%
elongation |
(%) |
2.
5 |
|
2.
5 |
|
2.
5 |
|
2.
5 |
|
2.
5 |
|
2.
5 |
|
2.
5 |
|
3 |
|
3 |
|
| Extension
at |
% |
20 |
55 |
20 |
55 |
20 |
55 |
20 |
50 |
25 |
40 |
25 |
40 |
25 |
40 |
25 |
40 |
25 |
40 |
| Drying
Shrinkage |
% |
5.
5 |
0.
5 |
5.
5 |
0.
5 |
5.
5 |
0.
5 |
5.
5 |
0.
5 |
5.
5 |
0.
5 |
5.
5 |
0.
5 |
5.
5 |
0.
5 |
6 |
0.
5 |
6 |
0.
5 |
| Drying
Shrinkage |
(%)1 |
10 |
10 |
10 |
10 |
10 |
10 |
10 |
10 |
10 |
| Adhesion |
N/mm |
7.
8 |
7.
8 |
7.
8 |
7.
8 |
7.
8 |
7.
8 |
7.
8 |
7.
8 |
7.
8 |
| Weight |
GMS |
280
+/- 10 |
300
+/- 12 |
345
+/- 15 |
400
+/- 15 |
500
+/- 15 |
590
+/- 12 |
700
+/- 30 |
860
+/- 35 |
1250
+/- 50 |
| Thickness |
mm |
0.45
+/- 0.05 |
0.50
+/- 0.05 |
0.55
+/- 0.05 |
0.65
+/- 0.05 |
0.80
+/- 0.05 |
0.90
+/- 0.10 |
1.20
+/- 0.10 |
1.
35 +/- 0. 12 |
1.40
+/- 0. 14 |
| Width |
Mm |
800
– 1400 0 |
800
– 1400 0 |
800
– 1400 0 |
800
– 1400 0 |
800
– 1600 0 |
800
– 1600 0 |
800
– 1600 0 |
800
– 1600 0 |
800
– 1600 0 |
| Length
|
m/roll |
800
10 |
800
10 |
800
10 |
800
10 |
400
10 |
400
10 |
400
10 |
400
10 |
400
10
|
SPECIFIC
NOTES :
The above are general specifications and can be changed
partly or totally, to make customers' requirements. |
| |
EP Belting fabric – Specification
| ITEM |
Unit |
EP – 80 |
EP – 100 |
EP – 125 |
EP- 150
|
EP-200 |
EP-250 |
EP-300 |
EP-350 |
NN-400 |
NN-500 |
| |
Warp |
Weft |
Warp |
Weft |
Warp |
Weft |
Warp |
Weft |
Warp |
Weft |
Warp |
Weft |
Warp |
Weft |
Warp |
Weft |
Warp |
Weft |
Warp |
weft |
| Structure |
Dtex |
1100 x
1 |
930 x1 |
1100 x 1 |
1400 x 1 |
1670 x 1 |
1400 x 1 |
1100 x 2 |
1870 x 2 |
1670 x 2 |
1400 x 2 |
1100 x 4 |
1870 x 2 |
1100 x 4 |
1870 x 2 |
1670 x 3 |
1870 x 2 |
1670 x 4 |
1870x 2 |
1670 x 6 |
1870x2 |
| Density |
End / 10cm |
170+/-2 |
70 +/-2 |
214+/-2 |
60 +/-2 |
170 +/-2 |
72+/-2 |
166+/-2 |
56+/-2 |
130+/-2 |
45+/-2 |
120+/-2 |
38+/-2 |
140+/-2 |
38+/-2 |
150+/-2 |
38+/-2 |
125+/-2 |
38+/-2 |
104+/-2 |
54+/-2 |
| Tensile Average >
|
N/mm
|
105 |
45 |
132 |
50 |
160 |
65 |
200 |
70 |
240 |
80 |
310 |
90 |
340 |
90 |
390 |
90 |
455 |
95 |
560 |
115 |
| Tensile
Strength
|
90 |
40 |
110 |
45 |
132 |
55 |
170 |
60 |
216 |
72 |
265 |
85 |
320 |
85 |
360 |
80 |
420 |
85 |
515 |
105 |
| 10% elongation |
(%) |
1. 5 |
|
1. 5 |
|
1. 5 |
|
1. 5 |
|
1. 5 |
|
1. 5 |
|
1. 5 |
|
1. 5 |
|
1. 5 |
|
2. 5 |
|
| Extension at |
% |
>
14 |
>60 |
>14 |
>45 |
>14 |
>45 |
>14 |
>45 |
>14 |
>45 |
>14 |
>45 |
>14 |
>45 |
>14 |
>45 |
>14 |
>45 |
>14 |
>40 |
| Drying Shrinkage |
% |
5 |
0. 5 |
5 |
0. 5 |
5 |
0. 5 |
5 |
0.5 |
5 |
0.5 |
5 |
0.5 |
5 |
0.5 |
5 |
0.5 |
6 |
0.5 |
6 |
0. 5 |
| Drying Shrinkage |
(%)1 |
10 |
10 |
10 |
10 |
10 |
10 |
10 |
10 |
10 |
10 |
|
| Adhesion |
N/mm |
7. 8 |
7. 8 |
7. 8 |
7. 8 |
7. 8 |
7. 8 |
7. 8 |
7.8 |
7. 8 |
7. 8 |
|
| Weight |
GMS |
310 +/- 10 |
350 +/- 15 |
435 +/- 20 |
540 +/- 20 |
650 +/- 20 |
790 +/- 30 |
870 +/- 30 |
1010+/-35 |
1140+/-40 |
1310+/-50 |
| Thickness |
mm |
0.55 +/- 0.05 |
0.55 +/- 0.05 |
0.60 +/- 0.05 |
0.70 +/- 0.05 |
0.85 +/- 0.05 |
1.07 +/- 0.10 |
1.20 +/- 0.10 |
1.26 +/-0.12 |
1.40+/-0.10 |
1.50+/-0.14 |
| Width |
mm |
800 – 1400 0 |
800 – 1500 0 |
800 – 1500 0 |
800 – 1500 0 |
800 – 1600 0 |
800 – 1600 0 |
800 – 1600 0 |
800 – 1600 0 |
800 – 1600 0 |
800 – 1600 0 |
| Length |
m/roll |
800 10 |
800 10 |
800 10 |
800 10 |
400 10 |
400 10 |
400 10 |
400 10 |
400 10 |
400 10 |
SPECIFIC
NOTES :
The above are general specifications and can be changed
partly or totally, to make customers' requirements. |
CONTACT PERSON
MR. INDERJIT BAKSHI, CE
textile@monarchinternational.biz
|
|
|
